Sync Module

The MIX-4050 Sync Module is designed to synchronize the MGC notification devices. The module can be used to synchronize the strobe flashes with the audio signal pattern. The same protocol is used to silence the horn while maintaining the strobe flashes
NEW MIX-4050 Sync Module is used to synchronize the strobe flashes with the audio signal pattern. The same protocol is used to silence the horn while maintaining the strobe flashes.

FEATURES
The MIX-4050 Sync Module is designed to be used with MGC NAC devices
The module can synchronize one (1) class A or two (2) class B NAC lines without the need for programming.
Supports two stage alarm function of “Alert” and “Evac”
This Sync Module is fail-safe and will provide power to the NAC line by default through a relay
The MIX-4050 has an isolated sync input/output which allows to link up to 20 modules together
Mounts in a standard 4” square or double gang electrical back box
Temperature range 32ºF to 120ºF  (0ºC to 49ºC)
Complies with all agency requirements including the 2016 edition
BENEFITS
The Sync module uses no power during standby
Does not require addressing
A built-in LED indicates activation and master / slave status
The Sync module is compatible with any UL/ULC listed panels and power supplies capable of providing regulated 24VDC or FWR for NACs
The interconnected MIX-4050 devices synchronize automatically without the need of programming or jumper setting.
COMPATIBLE DEVICES